Post Question Related To Your Printer Errors, Printer Installation, Printer Setup, Printer Support, Printer Customer Care All in One Place. For All Brand Like Hp Printer, Brother Printer, Epson Printer, Lexmark Printer etc.

Notifications
Clear all

How to fix Panasonic printer high voltage problem

1 Posts
1 Users
0 Likes
724 Views
Posts: 419
Admin
Topic starter
(@aliana)
Noble Member
Joined: 2 years ago

The "High Voltage Problem" is a common issue that can occur on Panasonic printers. It is usually caused by a malfunction in the printer's high voltage power supply. 

Causes :

  1. Malfunctioning High Voltage Power Supply: The most common cause of the High Voltage Problem on Panasonic printers is a malfunction in the printer's high voltage power supply. The power supply may be damaged or faulty.
  2. Defective Corona Wire: The corona wire in the printer may be defective or broken, which can cause the High Voltage Problem.
  3. Improper Installation: If the printer was not installed correctly, it can cause the High Voltage Problem. The printer's high voltage power supply must be installed correctly to avoid this issue.

 

Solutions :

  1. Restart Printer: A simple solution to resolve the High Voltage Problem is to restart the printer. Turn off the printer, unplug it from the power source, and wait for a few minutes before plugging it back in and turning it on again.
  2. Check High Voltage Power Supply: The high voltage power supply is the most common cause of the High Voltage Problem. Check the power supply for any damage or malfunction. If you find any issues, you may need to replace the power supply.
  3. Check Corona Wire: The corona wire may be defective or broken, causing the High Voltage Problem. Check the wire for any damage, and replace it if necessary.
  4. Check Installation: If the printer was not installed correctly, it can cause the High Voltage Problem. Check the installation manual and ensure that the high voltage power supply is installed correctly.
  5. Contact Panasonic Printer Customer Service: If the above solutions do not work, you may need to contact Panasonic printer customer service for further assistance. They can help you troubleshoot the issue and offer solutions specific to your printer model.

 

Conclusion :

The Panasonic printers high Voltage Problem can be caused by a malfunctioning high voltage power supply, a defective corona wire, or improper installation. By following the above solutions, you can troubleshoot and resolve the issue. If you are still experiencing problems, don't hesitate to contact Panasonic printer customer service for additional support. They are available to help you troubleshoot the issue and get your printer working properly again.

Share: