Post Question Related To Your Printer Errors, Printer Installation, Printer Setup, Printer Support, Printer Customer Care All in One Place. For All Brand Like Hp Printer, Brother Printer, Epson Printer, Lexmark Printer etc.

Notifications
Clear all

Sharp Printer Error Code F2-64 : Causes and Solutions

1 Posts
1 Users
0 Likes
484 Views
Posts: 419
Admin
Topic starter
(@aliana)
Noble Member
Joined: 1 year ago

The Sharp printer error code F2-64 is a common error that indicates a problem with the printer's paper feed system. This error code typically indicates that the printer is unable to feed paper through the printer properly.

Causes :

  1. Paper Jam: The most common cause of the F2-64 error code is a paper jam in the printer. Check the paper feed system for any jammed paper and remove it if necessary.
  2. Dirty Rollers: Dirty or worn rollers in the paper feed system may cause problems with paper feeding. Clean the rollers or replace them if necessary.
  3. Broken Paper Feed System: The paper feed system may be broken, causing problems with paper feeding. Have the paper feed system repaired if necessary.
  4. Incorrect Paper Type: Using the wrong type of paper may cause problems with paper feeding. Make sure that you are using the correct type of paper for your printer.

 

Solutions :

  1. Clear Paper Jam: Check the paper feed system for any jammed paper and remove it if necessary.
  2. Clean Rollers: Clean the rollers in the paper feed system if necessary.
  3. Repair Paper Feed System: Have the paper feed system repaired if necessary.
  4. Use Correct Paper Type: Make sure that you are using the correct type of paper for your printer.
  5. Reset the Printer: Reset the printer by unplugging it from the power source and then plugging it back in after a few seconds.
  6. Contact Sharp Printer Customer Support: If the solutions outlined above do not resolve the Sharp printer error code F2-64, it may be necessary to contact Sharp printer customer support for further assistance.

 

Conclusion :

The Sharp printer error code F2-64 is a common issue that can be caused by a variety of factors, including paper jams, dirty rollers, a broken paper feed system, and using the incorrect type of paper. By understanding the causes of the F2-64 error code and following the potential solutions outlined in this article, you should be able to quickly resolve the issue and get back to printing with your Sharp printer. If you are still experiencing issues, contact Sharp printer customer support for further assistance.

Share: